All functions working normally
Print page FAQ Contact United Kingdom United Kingdom / English

Metalog Guide E (DiaPro)

Select equipment disc size

Method details

Method number: 2732
Download documents:

These methods are meant as a guide

All methods are generic methods. This means that the methods have been developed according to the following standard: 6 specimens of 30 mm diameter clamped in a specimen holder of 160 mm diameter (MAXCY).

Grinding

  Step  PG FG 
  Surface MD-Piano 220MD-Allegro
  Abrasive Type DiaPro Allegro/Largo 9 µm
  Lubricant Type Water
  Speed (rpm) 300150
  Force (N) / Specimen 4040
  Holder direction >>>>
  Time (min) 01:0003:00

Polishing

  Step  P  OP
  Surface MD-DurMD-Chem
  Abrasive Type DiaPro Dur 3 µm OP-U NonDry
  Lubricant Type
  Speed (rpm) 150150
  Force (N) / Specimen 3015
  Holder direction >>><
  Time (min) 03:0001:00

Method comments

PG Time: As needed. OP Step: MD-Nap with DiaPro Nap B can be used instead of OP-Chem with OP-U.

This method is developed to fit a standard equipment configuration.

For advice on how to adjust the method to fit your equipment, please take a look at Preparation Parameters.

The preparation time for the plane grinding (PG) step depends very much on the condition of the samples and if they are prepared as single specimens or clamped in a specimen holder. Please check the samples after the first step and repeat it if necessary.

Method related products

Product no. Product name
40500074 Log in to see prices
40600395 Log in to see prices
40500092 Log in to see prices
40700066 Log in to see prices
40800129 Log in to see prices
40500065 Log in to see prices
40600369 Log in to see prices

Login

Password
Forgot your password?

Request access

e-Shop
e-Metalog
Digital Catalouge