Struers logo

Wrong username or password

Print page FAQ Contact Denmark Denmark / English

Metalog Guide Z (DiaPro)

Select equipment disc size

Method details

Method number: 2743
Download documents:

These methods are meant as a guide

All methods are generic methods. This means that the methods have been developed according to the following standard: 6 specimens of 30 mm diameter clamped in a specimen holder of 160 mm diameter (MAXCY).


  Step  PG FG 
  Surface MD-Piano 120MD-Allegro
  Abrasive Type DiaPro Allegro/Largo 9 µm
  Lubricant Type Water
  Speed (rpm) 300150
  Force (N) / Specimen 5040
  Holder direction >>>>
  Time (min) 01:0004:00


  Step  P 
  Surface MD-Dac
  Abrasive Type DiaPro Dac 3 µm
  Lubricant Type
  Speed (rpm) 150
  Force (N) / Specimen 30
  Holder direction >>
  Time (min) 03:00

Method comments

PG Time: As needed.

This method is developed to fit a standard equipment configuration.

For advice on how to adjust the method to fit your equipment, please take a look at Preparation Parameters.

The preparation time for the plane grinding (PG) step depends very much on the condition of the samples and if they are prepared as single specimens or clamped in a specimen holder. Please check the samples after the first step and repeat it if necessary.

Method related products

Product no. Product name
40500071 Log in to see prices
40600371 Log in to see prices
40800125 Log in to see prices
40500065 Log in to see prices
40600369 Log in to see prices


Forgot your password?

Request access

Tegramin20 EN Banner